CVAHU Custom Wiring

Configuring CVAHU Custom Wiring

Use the CVAHU Custom Wiring page to assign configured outputs to physical pins.

Purpose

View or modify sensor output wiring locations.

Mode

Off-line or On-line.

Note: To add or delete outputs, refer to CVAHU Controller Outputs.

Limits

Outputs must be configured using Unit Ventilator Controller Outputs page.

Procedure

  1. Click the Wiring Assignment button on the left pane to open the Wiring Assignment page.
  2. For Custom Assignment, select Custom from the Output Assignment field. The Custom Assignment fields become editable.
  3. Enter information into available fields.
  4. Click Commit to save the settings or Reset to revert to the last saved settings.
  5. Click Next to display the Wiring Diagram page or Back to display the PID Configuration page.

Fields

Name Definition
Default Assignment This column displays the default assignments as the outputs are configured in the outputs page
Custom assignment Custom assignment – to change the assignments
Existing If the device is online, this shows the assignments as in the device. Else, it shows from the database

Back