As shown in Figure 30, the Platform Administration view is one of several views for any platform, listed under the platform in the Nav tree and in the platform’s Nav Container View.
Included in this view (Figure 31) are commands and related dialogs in which you can:
Set the date and time in the JACE.
Typically, this is automatically handled by the Commissioning Wizard.
Change the HTTP port used by the JACE for the Niagara platform daemon (platform server).
The default port is 3011.
Enable or disable either or both FTP and Telnet access to the JACE.
By default, both FTP and Telnet are disabled, and use TCP ports 21 and 23, respectively.
FTP and Telnet pose security risks. We strongly recommend you keep each one disabled, unless otherwise directed by Systems Engineering. Upon completion of any use, they should be disabled once again.
View a simple text summary of the JACE’s current software configuration, including its model number, OS level, JVM version, installed modules, lexicons, licenses, certificates, and so on.
Use debug-level tools to change logging levels and view platform daemon output.
Perform other platform tasks available using the Commissioning Wizard, such changing platform authentication (platform’s username and password), and so on.
For more details, see the “Platform Administration” section in the Platform Guide.
Copyright © 2000-2016 Tridium Inc. All rights reserved.