To start the Commissioning Wizard

From Workbench with the JACE platform open, to start the Commissioning Wizard do the following:

1. In the Nav tree, right-click on Platform and select Commissioning Wizard.

   The dialog box Commissioning for “<IP address>” appears (Figure 3).

   Figure 3. Commissioning Wizard (default selections shown)

   
   
   
   
   

   By default, all steps are preselected except lexicon installation (for language support). Steps are executed in the order listed in the wizard.

   Commissioning steps include:

   • Request or install software licenses — Preselected for any new JACE.

   • Set module content filter level — Recommended.

   • Install a station from the local computer — Recommended.

   • Install/upgrade modules — (always preselected, whenever wizard is run).

   • Install/upgrade core software from distribution files — Preselected for any new JACE.

   • Sync with my local system date and time — Preselected in most cases (new JACE for example).

   • Configure TCP/IP network settings — Recommended.

   • Configure platform daemon authentication method — Recommended.

   • Install lexicons to support additional languages — Recommended for non-English language support.

2. As needed, click to include or omit steps.

   For a new JACE, you typically accept all default selections, plus if not already selected, add (check) “Sync with my local system date and time.”

3. Click the Next button to continue. With wizard selection defaults, this is Install license.