Information and/or specifications published here are current as of the date of publication of this document. Tridium, Inc. reserves the right to change or modify specifications without prior notice. The latest product specifications can be found by contacting our corporate headquarters, Richmond, Virginia. Products or features contained herein are covered by one or more U.S. or foreign patents. This document may be copied by parties who are authorized to distribute Tridium products in connection with distribution of those products, subject to the contracts that authorize such distribution. It may not otherwise, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without prior written consent from Tridium, Inc. Complete confidentiality, trademark, copyright and patent notifications can be found at: http://www.tridium.com/galleries/SignUp/Confidentiality.pdf © 2010 Tridium, Inc.
JACE, Niagara Framework, Niagara AX Framework and the Sedona Framework are trademarks of Tridium, Inc.
This document covers the initial NiagaraAX software configuration for a JACE-NXT with NiagaraAX. Instructions assume that you are an engineer, technician, or service person who is performing control system installation. This document is also in Workbench help, via the “docJaceNxtStartup” module.
![]()
AX-3.5 or later (NiagaraAX build 3.5.33 or higher) is required by a JACE-NXT.
For physical mounting and wiring details for any JACE controller, please see its specific hardware installation document. Also, this document does not cover station configuration or NiagaraAX components. For details on these topics, refer to NiagaraAX online help and the NiagaraAX User Guide.
The following main sections are in this document:
Copyright © 2000-2016 Tridium Inc. All rights reserved.