Index | Prev | Next

Requirements for JACE controller SRAM support

The following is required for SRAM support in the JACE controller, using either “onboard” SRAM or the SRAM option card, along with the platform DataRecoveryService:
  • JACE-8000, JACE-6E, or JACE-3E controller with onboard SRAM, or

    JACE-603 or JACE-645 with onboard SRAM, licensed to run AX stations, or

    JACE-2, JACE-6, and JACE-7 controller running AX-3.6 or later, with an available option card slot, and

    • An SRAM option card, installed in that option card slot.
    • The “platDataRecovery” module must be installed in the JACE (this module is automatically installed in platforms with "onboard" SRAM).
  • The JACE must also be licensed for this feature—see “Licensing”.

Related Links

  • Licensing
  • About the DataRecoveryService

    • Index | Prev | Next