Threat Level Setup view
Figure 372. Threat Level Setup tab
To access this view/tab, click .
The view has a Save control button at the top of the view area and a Threat Level Setup tab with two main areas that contain properties to configure.
Activation alert and alarm links
The chevrons to the right of these properties access alarm properties to configure for each type of threat level situation.- An
Activation Initiated Alertconfigures the alarm to generate when your an authorized person swipes a threat level group activation badge. - An
Activation Failure Alertconfigures the alarm to generate when an authorized person swiped a threat level group activation badge, but the system was unable to activate the group. - An
Activation Complete Alertconfigures the alarm to generate when an active threat level group is no longer needed. - An
Activation Mismatch Alertconfigures the alarm ... activationFailureAlarmconfigures the alarm to generate when activating a threat level has a problem.
Each activation alert and activation failure alarm provides a set of identical properties, which are documented in a separate topic.
Threat Level Range table
This table sets up building access based on the current threat level. For example, in a range from zero (0) to five (5), a person assigned to level three (3) would have access to a specific location when threat levels 0 through 3 are active, but would not have access to the same location when levels 4 and 5 are active. This range defines the meaning of each level from least significant (0) to most severe (10).
Two buttons support the configuration of threat level ranges:
Add opens the Add window for creating a new threat level.
Edit opens an edit window for changing a selected threat level’s properties.
The table summarizes the configured thread levels.
| Column | Description |
|---|---|
| Level | Assigns an arbitrary number to create a threat level. |
| Name | Provides a description of the level. |