Relay Links tab
This tab assigns and unassigns output relays to the selected intrusion zone for the purpose of communication output. This
output relay is active whenever the intrusion zone is in an armed state.
Figure 256. Intrusion zone Relay Links tab
To access this view from the main menu, click the click the Relay Links tab.
The title of the view indicates the currently-selected intrusion zone.
You add items to the currently displayed intrusion zone using the assign mode and the assign and unassign buttons.
Buttons
In addition to the standard control buttons (Delete, Filter, and Export), these buttons apply to relay links:
Hyperlink opens the Alarm Count to Relay tab for the selected intrusion zone.
Assign Mode buttons open and close the Unassigned pane.
Turn Off Relays manually disables an output relay.
Columns
| Column | Description |
|---|---|
| Display Name | Reports the name of the relay link. |
| Alarm Count Type | Identifies the count type configured (in the Add New Alarm Count to Relay view) to activate the relay. Unacked Alarm Count activates the relay for the length of the time defined by Timer or until the alarm is acknowledged. Open Alarm count activates the relay for the length of the time defined by Timer or until the alarm is cleared from the console. In Alarm Count activates the relay for the length of time defined by Timer or until the alarm returns to normal. Total Alarm Count activates the relay or the length of time defined by Timer when an alarm occurs.
|
| Alarm Count | Reports the number of alarms for the configured count type that activated the relay. |
| Relay Value | Indicates if the output relay is on (true) or off (false).
|
| Timer | Reports the maximum amount of time that the relay is energized. |