Output Configuration tab

The contents of this tab depends on the actual outputs that are physically connected to the reader.
Figure 180.   Example of an Output Configuration tab
Image

To access this view from the main menu click Controller (System) Setup > Remote Devices > Remote Modules > Remote Module Setup, followed by double-clicking a module row in the table, clicking the Doors tab, clicking the hyperlink for a door, clicking the hyperlink for the door’s reader, and clicking the Output Configuration tab.

In the example the red LED, green LED, and beeper are connected to the reader interface. The hyperlinked headings open additional views.

Property Value Description
Valid Green drop-down list Specifies how the green LED displays when an access granted signal is received.
Green Inactive State open or closed Configures a reader’s inactive state so that it matches the actual hardware requirements.
Invalid Red drop-down list Specifies how the red LED displays when an access denied signal is received. The Follow Strike State option is not a valid choice for the Invalid Red property because the Strike does not change state for an invalid credential.
Red Inactive State open or closed The Follow Strike State option is not a valid choice for the “Invalid Red” property. This is because the Strike does not change state for an invalid credential.
Valid Beeper drop-down list A valid beeper is a sound that provides an audible signal when an access granted message is received. This option list allows you to specify how the beeper sounds when an “access granted” signal is received.
Invalid Beep drop-down list An invalid beeper is a sound that provides an audible signal when an access denied message is received. This option list allows you to specify how the beeper sounds when an “access denied” signal is received.
Beeper Inactive State drop-down list Identifies the state of the output that will not activate the beeper.
Beeper on Door Held Open Alarm drop-down list Activates and configures the beep sound associated with a door-held-open alarm.
Intrusion Beep (visible only when the reader is assigned to an intrusion zone) true or false Provides an intrusion zone beep.

This property replaces Beeper on Door Held Open Alarm when a reader is assigned to an intrusion zone. Also, some properties are not available for editing and appear dimmed (read-only).

Inactive Disables the beep sound.

Warning only provides a beep that precedes the actual alarm condition by the number of seconds specified by Warning Time. For example, if Door Held Open Limit is 60 seconds, 30 seconds after the door opens the warning beep sounds and stops either when the door closes or when the door sensor goes into an alarm condition.

Continuous provides a warning-time beep, however, at the end of the Warning Time, the beep continues to sound until either the door closes or the Maximum Continuation Time is reached. You specify this time in minutes and seconds using the Max Continuation text box.

Related Links

  • Reader view, Summary tab (Parent Topic)