Additional Points, Configuration tab
This view configures individual module points.
NOTE: This description covers both reader and input/output points. Differences are noted where appropriate.
Figure 189. Edit Point (input view)
You access these views from the main menu by clicking , double-clicking the module row in the table, click the Additional Points tab, and clicking a link to a point.
The point’s display name appears at the top of the view (Di1 in this example).
Properties
| Property | Value | Description |
|---|---|---|
| Edit button and Facets | button and additional properties | Defines the units displayed for a point. For example, if a point is inactive or false, one may set the facet to “locked” or “normal” depending on how the system uses the point. |
| Status | read-only | Reports the status of the point. |
| Enabled | true and false |
Turns the feature on (true) and off (false). |
| Inactive State | Open and Closed |
Defines the normally inactive state of the digital input or relay output as either Open or Closed, depending on the device requirements.
|