Asure ID Client Device view
This view configures the Asure ID client device.
Figure 435. Asure ID Client Device tab
You access this view from the Supervisor’s main menu by clicking Photo IDfollowed by double-clicking the Asure ID Client Device row in the Photo ID Network table.
Links
In addition to the Save link, these links support the Asure ID client device.
- Ping sends a message to the device to confirm that it is on line.
- Photo ID Network returns to the Photo ID Network view.
Properties
| Property | Value | Description |
|---|---|---|
| Status | read-only | Reports "Issueable" until the badge is assigned, then it may be Active, Disabled, Lost or Unknown. |
| Enabled | read-only | Turns the feature on (true) and off (false). |
| Fault Cause | read-only | Reports the reason why a network, component, or extension is in fault. Fault Cause is blank unless a fault exists. |
| Health | read-only | Reports the status of the network or component. This advisory information, including a time stamp, can help you recognize and troubleshoot network problems but it provides no direct network management controls. |
| Alarm Source Info | Ref Chooser | Links to a set of properties for configuring and routing alarms. These properties are documented in the Alarm Setup topic of the PDF and in the help system (search for Alarm Source Info). |
| Key | read-only | Displays a unique identifier for a particular EntsecAsureID (non-legacy) device and is provided automatically during discovery. After manually adding the EntsecAsureID device, you match with the discovered device in order to populate this property. |
| Host Name | text | Defines the platform host name or the IP address of the computer that is running EntsecAsurID. |
| EntsecAsureID Port | text | Identifies the port used for the EntsecAsureId connector. |
| Timeout |