| Status |
read-only |
Reports "Issueable" until the badge is assigned, then it may be Active, Disabled, Lost or Unknown. |
| Relay In |
Ref Chooser |
Assigns the relay input source. The system automatically populates the Ref Chooser. |
| Owner |
text |
Provides a unique name for the source of the override. |
| Override Type |
drop-down list |
Defines the type of override. Use Access Unlock Time causes the manual override to use the time defined by Access Unlock Time, under the Reader Setup section of the Hardware Module Setup view. Quick Open unlocks the door momentarily and relocks it, allowing just enough time for someone standing at the door to open it. Pick Time provides minute and second properties to specify a time for the door to remain unlocked. Open Door Once unlocks the door and leaves it unlocked until you click the Manual Override button a second time and confirm that you want to cancel the manual override. Pick Lock Time specifies a time (in minutes and seconds) to temporarily lock a door that is currently unlocked by an assigned schedule setting.
When this override option is invoked, the door remains locked until the configured override time expires or until you click
the Manual Override button a second time and confirm that you want to cancel the manual override.
|