This tab provides these configurable or display-only properties.
| Property | Value | Description |
|---|---|---|
| Inactive State | Open or Closed |
Match the normally inactive state of the ADA device. |
| Status | read-only | Reports "Issueable" until the badge is assigned, then it may be Active, Disabled, Lost or Unknown. |
| Inhibit Sensor | read-only true or false |
Indicates if the door-forced-open alarm stays inhibited during an exit request. This property value can be true only if the Status is active and Enabled Schedule is set to true. If either of these values changes, Inhibit Sensor changes from true to false after a time that is equal to the Access Unlock Time. |
| Unlock on Exit Request | true or false |
Configures an exit request to unlock a door. true unlocks the door and powers the ADA output for the ADA Output time. false, configures the ADA device to work only when the door is already unlocked.
|
| Enabled Schedule | drop-down list (defaults to None) | Configures the time of day to enable the ADA functionality. For this to work, the door strike must be unlocked and the schedule
must be true. You assign a schedule to the input from the drop-down list. When set to None, ADA functionality is enabled when the door strike is unlocked either by access card swipe or an unlock schedule assigned
to the strike. When selected, this schedule adds additional control.
|
| ADA Output | drop-down lists | Defines the relay output to control the ADA device. |
| ADA Output Time | minutes and seconds) | Defines the length of time that the ADA output signal remains active (to power the ADA device). Values are only used when
Auto Relock option is set to Unlock Time.
|
| Exit Request Fault Alarm Class | drop-down list | Sets the desired priority for an exit request fault by choosing an appropriate alarm class: Low, Medium, High, or Off (cancels any alarm generation).
|
| ADA Input | check box | Uses an option list to designate the supervised input that is used for the activated the ADA device. Select the associated
check box to enable or deselect it to disable the selected input.
|