Nrio Driver views, tabs and windows

This driver provides an interface between a remote controller station and the hardware modules connected to the station, as well as to other remote I/O modules. This driver is not available on a Supervisor PC. With this driver you can incorporate standard building automation features, such as temperature and energy management in your security system.

A low-level daemon communicates to the I/O processors on the hardware. An Nrio device uses RS-485 connections, which allow a single controller to run multiple NrioNetworks, each with its own COM port.

For more information about this driver and how to configure the devices it supports, see the NRIO Driver Guide. While this guide documents the Workbench interface, the same properties are available using the Web UI.

Related Links

  • Nrio Device Manager view
  • Nrio Module view
  • Nrio Point Manager, Analog Points tab
  • Nrio Point Edit view
  • History Extension view