Milestone X Protect Network tab
This view and tab configures Milestone X Protect network properties
Figure 219. Milestone X Protect Network tab
In addition to the standard properties (Status, Enabled, Fault Cause, Health, and Alarm Source Info), these properties support Milestone X Protect networks.
| Property | Value | Description |
|---|---|---|
| Monitor | additional properties | Configures ping properties, alarm on failure and startup alarm delay. Refer to Monitor Properties below. |
| Tuning Policies | additional properties | Defines rules for evaluating both write requests, that is to writable proxy points, as well as the acceptable “freshness” of read requests that result from polling. |
| Fox Video Stream Preferred | true or false (default)
|
Selects or declines the use of Fox streaming. |
| Native Process Port | read-only | Displays the port. |
Monitor properties
| Property | Value | Description |
|---|---|---|
| Ping Enabled | true ( default) or false |
Indicates of the ability to ping the network is on or off. Pinging the network ensures the security system that its surveillance capabilities are up and running. |
| Ping Frequency | hours, minutes, seconds (defaults to 5 minutes | Configures when to automatically ping the network. |
| Alarm On Failure | true ( default) or false |
Indicates if the failure of a ping should result in an alarm. |
| Startup Alarm Delay | hours, minutes, seconds (defaults to 5 minutes | Configures a period of time before the system generates the alarm. |