Database configuration tabs (Db2, MySQL, SqlServer databases)
Figure 330. MySQL database properties
| Property | Value | Description |
|---|---|---|
| Status | read-only | Reports the condition of the entity or process at last polling.
{ok} indicates that the entity is licensed and polling successfully. {down} indicates that the last poll was unsuccessful, perhaps because of an incorrect property. {disabled} indicates that the Enable property is set to false. {fault} indicates another problem. Depending on conditions, multiple status flags may be set including {fault} and {disabled}, combined with {down}, {alarm}, {stale}, and {unackedAlarm}. |
| Enabled | true or false |
Turns the feature on (true) and off (false). |
| Fault Cause | read-only | Reports the reason why a network, component, or extension is in fault. Fault Cause is blank unless a fault exists. |
| Health | read-only | Reports the status of the network or component. This advisory information, including a time stamp, can help you recognize and troubleshoot network problems but it provides no direct network management controls. |
| Alarm Source Info | additional properties | Contains a set of properties for configuring and routing alarms when this component is the alarm source. |
| Host Address | IP address | Defines the IP address of the computer platform where the database resides. |
| User Name | text | Defines the user name credential with which to log in to the database. |
| Password | two properties | The Password property defines a password that is used to log in to the database. The Confirm property must be an exact match to the Password property.
|
| Database Name | text | Defines the name of the database to connect to. If the database does not already exist, the system creates it when you save
the property sheet with a completed Base Directory and Database Name.
|
| Port | number | Specifies the port to use when connecting with the database.
Common default values are: Db2Database - Port 6789 HsqlDbDatabase - no port is specified because this rdb is for local database use only. MySQLDatabase - Port 3306 SqlServerDatabase - Port 1433 |
| Extra Connection Properties | semicolon list of property,value pairs in the form “property=value;...” | Properties, such as charset, define values to use when connecting to the database.
|
| Max Active Connections | number |
Defines the maximum number of active connections that can be allocated from this pool at the same time. Changing this property requires a station restart. |
| Peak Active Connections | number |
Defines the peak number of active connections in the pool. |
| Active Connections | number |
Defines the number of current active connections in the pool. |