Intrusion Zones tab
This tab manually associates and disassociates intrusion zones with the intrusion display.
Figure 265. Intrusion Zones tab
You access this view by clicking , followed by clicking the Add button (
) or double-clicking an existing display in the table, and clicking the Intrusion Zones tab.
In addition to the standard buttons (Hyperlink Filter, and Export, the learn mode, assign and unassign buttons configure the association.
NOTE: This configuration of an intrusion display cannot be saved unless at least one intrusion zone is assigned to it.
Intrusion Zone columns
| Column | Description |
|---|---|
| Display Name | Displays the name that identifies the intrusion zone/display association. |
| Zone Status | Reports the current condition of the entity as of the last refresh: {alarm}, {disabled}, {down}, {fault}, {ok}, {stale}, {unackedAlarm} |
| Time Delay | Reports the length of time the system waits after someone sets the alarm before it arms the zone. |
| Warning Time | Reports the length of time the system sounds a warning before arming a zone. |
| To Display Path String | Defines the station path for this zone. |