TemplateStationExt (provisioningNiagara-TemplateStationExt)

This component currently only supports a Details action, which will show information about component and device templates that have been deployed to the remote station.

These are the only template types managed by a station’s Template Service (application and station templates are not). Invoking the Details action will print deployed template information to the Supervisor console.

This extension will provide additional functionality in future releases and template management capabilities are expanded.

Figure 12. Templates Station Ext Properties

To access these properties, expand Config > Drivers > NiagaraNetwork > NiagaraStation, and double-click Templates. NiagaraStation represents your station name.

Property	Value	Description
Enabled	`true` or `false`; defaults to `true`	Activates (`true`) and deactivates (`false`) use of the object (network, device, point, component, table, schedule, descriptor, etc.).
Status	read-only	Reports the condition of the entity or process at last polling. `{ok}` indicates that the component is licensed and polling successfully. `{down}` indicates that the last check was unsuccessful, perhaps because of an incorrect property, or possibly loss of network connection. `{disabled}` indicates that the `Enable` property is set to `false`. `{fault}` indicates another problem. Refer to `Fault Cause` for more information.
Fault Cause	read-only	Indicates the reason why a system object (network, device, component, extension, etc.) is not working (in fault). This property is empty unless a fault exists.

Figure 13. Action

To access this action, right-click the Templates > Actions > Details. The Details action displays information about templates deployed to remote station.