Index | Prev | Next

SoftwareStationExt (provisioningNiagara-SoftwareStationExt)

This component supports the steps that a provisioning job can run on a station. By default this component is always enabled. Other functions provided by the station are available using the Station Software View.
Figure 11.   Software Station Ext properties
Image

To access these properties, expand Config > Drivers > NiagaraNetwork > NiagaraStation and right-click the Software > Views > AX Property Sheet. NiagaraStation represents your station name.

Property Value Description
Enabled true (default) or false
Activates (true) and deactivates (false) use of the object (network, device, point, component, table, schedule, descriptor, etc.).
Changing this property to false prevents the processing of any steps against this station. Enabled must be set to true to use the Station Software View and Supervisor Software Manager on this station.
Status read-only
Reports the condition of the entity or process at last polling.

{ok} indicates that the component is licensed and polling successfully.

{down} indicates that the last check was unsuccessful, perhaps because of an incorrect property, or possibly loss of network connection.

{disabled} indicates that the Enable property is set to false.

{fault} indicates another problem. Refer to Fault Cause for more information.

Fault Cause read-only
Indicates the reason why a system object (network, device, component, extension, etc.) is not working (in fault). This property is empty unless a fault exists.
Last Update date and time Documents the last platform snapshot. This property is null if a platform snapshot has never occurred.

Related Links

  • Extension components in the provisioningNiagara module (Parent Topic)

    • Index | Prev | Next