This component is a convenience step that generates three separate sets of credentials in one place and in one sequence. The
individual steps are Set Platform Credentials, Set Station User Password and Set Platform User Password.
You add this component in the top pane (Provisioning steps to run) of the Niagara Network Job Builder or Niagara Network Prototype View.
Figure 50. Security Job Steps — Set Platform Credentials
| Property |
Value |
Description |
| New Username |
text |
Defines the New Username to access an existing platform.
|
| New Password |
text |
Defines the New Password to access an existing platform.
|
| Confirm Password |
text |
Confirms the changed password to access an existing platform. |
| This host will be licensed for FIPS 140–2 |
check box |
Enables the Federal Information Processing Standard, version 140–2. |
Figure 51. Security Job Steps — Set Station User Password
| Property |
Value |
Description |
| Use connection username |
check box |
Enables the use of the same connection username. |
| Current Password |
text |
Defines the Current Password to access an existing station.
|
| New Password |
text |
Defines the New Password to access an existing station.
|
| Confirm Password |
text |
Confirms the changed password to access an existing station. |
Figure 52. Security Job Steps — Set Platform User Password
| Properties |
Value |
Description |
| Current Username |
text |
Defines the Current Username to access an existing platform.
|
| Current Password |
text |
Defines the Current Password to access an existing platform.
|
| New Password |
text |
Defines the New Password to access an existing platform.
|
| Confirm Password |
text |
Confirms the changed Password to access an existing platform.
|
| This host will be licensed for FIPS 140–2 |
check box |
Enables the Federal Information Processing Standard, version 140–2. |
