Index | Prev | Next

Update Connections Using Provisioning Station’s DHCP Server

This component updates the Supervisor-to-station connections when a JACE-9000 is acting as a Supervisor for a group of Edge devices connected through the secondary network port. It uses information pulled from the DHCP (Dynamic Host Configuration Protocol) server running on the JACE-9000. This information includes IP address and port information for Fox and Platform connections.
Figure 31.   Update Connections Using Provisioning Station’s DHCP Server
Image

To access these job step component, expand Config > Drivers > NiagaraNetwork and double click the ProvisioningNwExt or NiagaraNetworkJobPrototype. The Niagara Network Job Builder or the Niagara Network Prototype View view opens. In the top pane Provisioning steps to run click the (Image) icon and click Update Connections Using Provisioning Station’s DHCP Server.

 NOTE: Only Edge devices respond to this request in a NiagaraNetwork. JACE controllers do not respond to these requests. 

Related Links

  • Job step components in the provisioningNiagara module (Parent Topic)

    • Index | Prev | Next