provisioningNiagara-BackupStepDetailsView

This view shows the details for a Backup Stations step executed against a single station, while that step is still running. You access this from the Niagara Network Job View or the Station Job List by clicking “>>” next to the running step.

If the job step is other than a Backup Stations step, and the step is still running, you see a slightly different view, the Niagara Network Job View. In either case, once the step finishes, neither view is accessible. Both are replaced by the Batch Job Step Log File View.

This view provides a summary table of log messages that occur during step execution. To view additional Log Details, if any, double-click an individual row.

Figure 91. Backup Step Details View with details on one running backup step for a station

NOTE: Provisioning backups work using either the local BackupService or the CloudBackupService. When the CloudBackupService is installed it provides all the functions of the local BackupService. You can make successful backups using either the Backup Manager view to create manual backups or using the Backup Stations step in provisioning jobs in the Supervisor. Backups will contain the expected files based on the CloudBackupService exclusions. Backups created by a provisioning job prototype follow the configured job disposition settings and will be deleted when new backups are created.

Step elements

Elements, columns and buttons	Value	Description
Device	element	Identifies the station that is being processed or has been processed.
Job Step	element	Identifies the type of provisioning step: Backup Stations, File Copy, Install Software, etc.
Start or Started	date and time	Displays the date and time that the step began processing.
End or Ended [job]	date and time	Displays the date and time when the job stopped running. This property is blank if the job is still running.
Status or State	read-only text	Displays the current or final state of each step: `Running` — the step is executing. `Canceling` — the request to cancel the step was sent, but has not been processed yet. The step is still running. `Success` — the step finished successfully. `Canceled` — the step was canceled before it completed and is no longer running. `Failed` — the step did not complete Each row in the table ends with a details button (>>) and a dispose button (X) . This button functions the same as the Step Details button at the bottom of the view. The overall status for the step in other stations, may be different).
File	text (visible only if a Backup Stations step)	Identifies the file path and name on the Supervisor for the saved backup .dist file. It uses the convention: `^provisioningNiagara/stationData/stationName/backups/backup_stationName_yymmdd_hhmm.dist`

Columns

Columns	Value	Description
Status or State	read-only text	Displays the current or final state of each step: `Running` — the step is executing. `Canceling` — the request to cancel the step was sent, but has not been processed yet. The step is still running. `Success` — the step finished successfully. `Canceled` — the step was canceled before it completed and is no longer running. `Failed` — the step did not complete Each row in the table ends with a details button (>>) and a dispose button (X) . This button functions the same as the Step Details button at the bottom of the view. The overall status for the step in other stations, may be different).
Timestamp	date and time	Displays the date and time when the log message was written.
Message	text	Displays the log message.

Buttons

Button	Value	Description
Job Summary	button always enabled	Changes to the Batch Job Log File View for the job that contains this step.
Refresh Log	button enabled when information needs to be refreshed	Recreates the log.
Restore	button available if the job step is Backup Station and the backup completed successfully	Restores the station using the .dist file saved from this provisioning job. If you answer Yes to the confirmation window (no undo), an install backup job executes immediately and the view changes to the Niagara Network Job View.