batchJob-JobStepDetailsView

The Job Step Details View shows the details for the provisioning job step that is currently running on a single station. You access this view from either the Niagara Network Job View or the Station Job List when you click the “<<” button to the right of the running step. After the job completes and you ask for step details, instead of this view the system opens the Batch Job Step Log File View.

This view provides a summary table showing the log messages that occurred during step execution. To show additional Log Details, if any, double-click a step row in the table.

Figure 88. Details for the currently-running step on a single station

If the currently-running station step is a backup of the station, instead of this view, the system opens a slightly different view: the Backup Step Details View. The view for a Run Robot step provides additional buttons.

Elements

Elements, columns and buttons	Value	Description
Device	element	Identifies the station that is being processed or has been processed.
Job Step	element	Identifies the type of provisioning step: Backup Stations, File Copy, Install Software, etc.
Start or Started	date and time (read-only)	Displays the date and time that the system submitted the job to the job queue.
End or Ended [job]	date and time	Displays the date and time when the job stopped running. This property is blank if the job is still running.
Status or State	read-only text:	Displays the current or final state of the job. The first three states appear on the Device Network Job view. `Unknown` —the job is pending execution. `Running` — the job is executing. `Canceling` — request to cancel the job was sent, but has not been processed yet, and the job is still executing. `Success` — job finished successfully, with all steps completed for all stations. `Canceled` — job was canceled before it completed, and is no longer running. `Failed` — at least one step failed in one station; job is no longer running. Each row in the table ends with a details button (>>) and a dispose button (X) . Clicking this button changes the view to the Niagara Network Job view or the Batch Job Step Log File view, which shows all logged messages that are related to this single job. The overall status for the job in other stations, may be different).
File	text (visible only if a Backup Stations step)	Identifies the file path and name on the Supervisor for the saved backup .dist file. It uses the convention: `^provisioningNiagara/stationData/stationName/backups/backup_stationName_yymmdd_hhmm.dist`
Status or State	read-only text	Displays the current or final state of each step: `Running` — the step is executing. `Canceling` — the request to cancel the step was sent, but has not been processed yet. The step is still running. `Success` — the step finished successfully. `Canceled` — the step was canceled before it completed and is no longer running. `Failed` — the step did not complete Each row in the table ends with a details button (>>) and a dispose button (X) . This button functions the same as the Step Details button at the bottom of the view. The overall status for the step in other stations, may be different).
Timestamp	date and time	Displays the date and time when the log message was written.
Message	text	Displays the log message.
Details	text	Provides additional information (or the beginning of such information) related to the step.

Columns

Elements, columns and buttons	Value	Description
Device	element	Identifies the station that is being processed or has been processed.
Job Step	element	Identifies the type of provisioning step: Backup Stations, File Copy, Install Software, etc.
Start or Started	date and time (read-only)	Displays the date and time that the system submitted the job to the job queue.
End or Ended [job]	date and time	Displays the date and time when the job stopped running. This property is blank if the job is still running.
Status or State	read-only text	Displays the current or final state of each step: `Running` — the step is executing. `Canceling` — the request to cancel the step was sent, but has not been processed yet. The step is still running. `Success` — the step finished successfully. `Canceled` — the step was canceled before it completed and is no longer running. `Failed` — the step did not complete Each row in the table ends with a details button (>>) and a dispose button (X) . This button functions the same as the Step Details button at the bottom of the view. The overall status for the step in other stations, may be different).
File	text (visible only if a Backup Stations step)	Identifies the file path and name on the Supervisor for the saved backup .dist file. It uses the convention: `^provisioningNiagara/stationData/stationName/backups/backup_stationName_yymmdd_hhmm.dist`
Status or State	read-only text	Displays the current or final state of each step: `Running` — the step is executing. `Canceling` — the request to cancel the step was sent, but has not been processed yet. The step is still running. `Success` — the step finished successfully. `Canceled` — the step was canceled before it completed and is no longer running. `Failed` — the step did not complete Each row in the table ends with a details button (>>) and a dispose button (X) . This button functions the same as the Step Details button at the bottom of the view. The overall status for the step in other stations, may be different).
Timestamp	date and time	Displays the date and time when the log message was written.
Message	text	Displays the log message.
Details	text	Provides additional information (or the beginning of such information) related to the step.

Buttons

Button	Value	Description
Job Summary	button always enabled	Changes to the Batch Job Log File View for the job that contains this step.
Refresh Log	button enabled when information needs to be refreshed	Recreates the log.