Setting station user password

This procedure creates a provisioning job to set the user credentials for the existing Fox connection on each remote device station in the job. It also updates the user credentials in the corresponding station proxy in the Supervisor’s NiagaraNetwork.

Prerequisites: The BatchJobService is available under the Services node and the ProvisioningNwExt component is available under your NiagaraNetwork in the Nav tree. The Niagara Network Job Builder (for a one-time job) or the Niagara Network Prototype View (for a prototype job) is open. You have the credentials for the platform connection to the remote device.

In the Niagara Network Job Builder window in the top pane, Provisioning steps to run, click add ().
The New Job Step window opens.
Click the Set Station User Password step and click OK.
The the Set Platform Credentials window prompts for the new username and password for the platform connection to the remote device.
Enter the current and new username and password used for the Fox connection to the remote station, and click OK.

NOTE: To change the existing Fox connection user, deselect the check box and enter the new Username.
In the bottom pane, Stations to include in the job, click add ().
The Add Device window opens.
Select the stations and click OK.
To initiate the provisioning job, review your choices and click Run Now at the bottom of the Niagara Network Job Builder view.
The view changes to the Niagara Network Job View, where steps and results appear as they are executed.