Setting security job steps
This procedure creates three provisioning job steps to set platform credentials, set station user password and set platform
user password. It is equivalent to adding these three steps individually.
Prerequisites:
- The BatchJobService is available under Services and ProvisioningNwExt component is available under your NiagaraNetwork.
- Either the Niagara Network Job Builder View or the Niagara Network Prototype View (for a prototype job) is open.
- In the Niagara Network Job Builder view, click
(Add) in the top pane, Provisioning steps to run.The New Job Step window opens. - Select the Security Job Steps and click OK.The Set Platform Credentials window opens.
- Enter the new platform username and password, confirm new password, select the This host will be licensed for FIPS 140–2 check box if this system is intended to be FIPS compliant, and click OK.The Set Station User Password window opens.
- Select the Use connection username check box if you intend to use the connection username. Enter the current station user password, new password, confirm new
password, and click OK.The Set Platform User Password window opens.
- To change the password for an existing platform user, enter the current username, current password, new password, confirm password. Select the This host will be licensed for FIPS 140–2 check box if this system is intended to be FIPS compliant, and click OK.
- In the bottom Stations to include in the job, click (Add).The Add Device window opens.
- Select the stations and click OK.
- Review your choices and click the Run Now button at the bottom of the Niagara Network Job Builder view to initiate the provisioning job.The view changes to the Niagara Network Job View, where steps and results appear as they are executed.