Setting platform credentials
This procedure creates a provisioning step to set the platform credentials on each remote device in the job. It also updates
the platform credentials in the corresponding station proxy in the
Prerequisites: The BatchJobService is available under Services. The ProvisioningNwExt component is available under the NiagaraNetwork. The Niagara Network Job Builder (one-time) or Niagara Network Prototype View (reoccurring job) is open.
- In the top pane, Provisioning steps to run, click add (
).The New Job Step window opens. - Click the Set Platform Credentials step and click OK.The system prompts for the new username and password for the platform connection to the remote device.
- Enter the
UsernameandPasswordfor the platform connection to the remote device, select the check box if this system is intended to be FIPS compliant, and click OK. - In the bottom pane, Stations to include in the job, click add ().The Add Device window opens.
- Select the stations and click OK.
- To initiate the provisioning job, review your choices and click Run Now.The view changes to the Niagara Network Job View, where steps and results appear as they are executed.