Installing new software modules
Installing new modules that are not already running on the target device may be required to support all dependencies required
by the deployed station services, networks, templates and other components. This is a one-time provisioning procedure.
Prerequisites: The BatchJobService is under Services. The ProvisioningNwExt component is under the NiagaraNetwork.
Perform the following steps:
- In the top pane, Provisioning steps to run, click add (
).The New Job Step window opens. - Select Install Software and click OK.The Install Software window opens.
- Apply a filter to the list.
- Select one or more modules and click OK.
- In the bottom pane, Stations to include in the job, click add ().The Add Device window opens.
- Select the stations and click OK.
- To initiate the provisioning job, review your choices and click the Run Now.The view changes to the Niagara Network Job View, where steps and results appear as they are executed. The step installs all modules selected from the list.
If needed, the Sync Workbench button in the Supervisor Software Manager view copies the latest software from the