Installing a clean distribution file
This procedure creates a provisioning job to install a clean distribution file on each station job.
Prerequisites: The BatchJobService is available under Services. The ProvisioningNwExt component is available under the NiagaraNetwork. The target platform types match the distribution file you intend to provision. Either the Niagara Network Job Builder (one-time job) or the Niagara Network Prototype View (repeating job) is open.
- In the top pane, Provisioning steps to run, click add (
).The New Job Step window opens. - Click the Install Clean Distribution step and click OK.The Clean Distribution File window opens.
- Navigate to and select the desired clean distribution file, and click OK.
- In the bottom pane, Stations to include in the job, click add ().The Add Device window opens.
- Select the stations and click OK.NOTE: Only select stations that match the platform of the selected clean distribution file. The job step fails for any device that does not match the selected clean distribution file.
- To initiate the provisioning job, review your choices and click the Run Now.The view changes to the Niagara Network Job View, where steps and results appear as they are executed.