Adding a station user

This procedure creates a provisioning job to add a new user to the UserService in each station.

Prerequisites: The BatchJobService is available under Services and ProvisioningNwExt component is available under your NiagaraNetwork. Either the Niagara Network Job Builder View (for a one-time job) or the Niagara Network Prototype View (for a prototype job) is open.

In the top pane, Provisioning steps to run, click add ().
The New Job Step window opens.
Click the default Add Station User step and click OK.
The Add a new user to the station window opens.
A password must be supplied for the new user.
Enter the Username and Password for the new user, if the user will have the administrator role, select the Create with admin role check box, and click OK.

NOTE: If the check box is not selected, the job creates the user with no role assigned.
In the bottom pane, Stations to include in the job, click add ().
The Add Device window opens.
Select the stations and click OK.
Review your choices and click Run Now at the bottom of the Niagara Network Job Builder view to initiate the provisioning job.
The view changes to the Niagara Network Job View, where steps and results appear as they are executed. This step adds a named user to the UserService for each station in the provisioning job.