You already set up this user when you created and assigned the certificate to it. This procedure updates this user with additional
information: role, .nav file and other information.
Prerequisites: You are working in
Workbench connected to your station that manages the display device.
- Expand and double-click the UserService.
The User Manager opens.
- To edit the existing user, select it in the table and click Edit.
The Edit window opens.
- Configure these properties:
- For
Roles, assign the name of the role you created, for example, Intrusion Display
- For
Nav File, assign the name of the file you created, for example, file:^Nav/Intrusion.nav
- For
Allow Concurrent Sessions, select false
- Configure the
Default Web Profile, HTML5 Hx Profile as follows:
- Enable Hx Workbench View = Yes
- Enable Nav Tree Side Bar = No
- Enable Search Side Bar = No
- Enable Nav File Tree = No
- Enable Config Tree = No
- Enable Files Tree = No
- Enable Histories Tree = No
- Enable Hierarchies Tree = No
- Enable View Selection = No
- For the
Mobile Web Profile, configure properties as follows:
- For
Mobile Nav File enter the name of the file you created, for example, file:^Nav/Intrusion.nav.
- Set
Type to Handheld Hx Profile.
- When you finish setting up these properties, click OK.
The display should now be able to connect to your station. The role and permissions you configured for the display user are
the minimum needed to operate the device. You can certainly add more permissions later. To ensure that your display always
attempts to navigate to the correct station page, add a path to the url for your controller in the display setup of your station
connection. Using the example of an intrusion keypad, the url for the display could be: /ord/station:|slot:/Services/AlarmService/AndroidIntrusionDisplay/AndroidView.