Connecting to an Ethernet source with Static IP enabled

This is a special case when connecting to an Ethernet source.

Prerequisites: The display is connected to the network using an Ethernet cable.

Turn the display on and boot the source.
There is no DHCP (Dynamic Host Configuration Protocol) so the Connection Type window opens.
Tap ETHERNET.
The Wireless & networks view opens.
Scroll to the bottom of the view and select Ethernet Ip mode.
The Ethernet Ip mode window opens.
Select static and enter the network settings for a static Ethernet connection. Add a value to each property, then save the settings.
The app finds any sources already connected to the same network and displays the Networks and Content Sources view.
Scroll to find the source to connect to and click the blue arrow.
The source options expand.
Configure the name and custom URL.
This is where you enter any port(s). In this case :3000 for the Niagara box we are connecting to.

The edited source appears to the right.
Click PREVIEW, then click LAUNCH.
The app displays the content from the source. In this case it displays a Login.
In this example, a Niagara station is the source. The screen capture shows the station login.