Setting up a Maxpro network

The Maxpro network manages all Maxpro devices including NVRs (Network Video Recorders) and cameras. This procedure sets up the Maxpro network in the station and assigns the host name.

Prerequisites: You are using Workbench and are connected to a station. You have a license to use the Maxpro driver.

Open the maxpro palette.
Drag the MaxproNetwork component to the Drivers container in the station.
Right-click MaxproNetwork and click Views > AX Property Sheet.
The network Property Sheet opens.
Expand Https Config, > Addressenter localhost for Ip Address and click Save.

Setting up a Maxpro network

Related Links