This topic summarizes the history of this document.
March 21, 2024
- Added note for supported view for “Mouse Down Button widget”
- Added note in “XProtect Requirements” topic
June 12, 2023
- Updated “Software Versions ” for Maxpro Driver
February 18, 2022
- Added in “Bql Query Builder” that the Bql Query Builder is also available when you are connected to your station through a
web browser. JACE-9000
December 2, 2021
- Updated “The xprotect driver” with supported Xprotect versions.
- Updated Maxpro appendix including several new topics
June 25, 2021
Updated the Axis Video driver appendix:
- Added section, “Supported browsers” to introductory topic.
- Added information about camera discovery to “Adding an Axis camera.”
- Added a new procedure, “Adding video to a graphic.”
March 9, 2021
Updated the Axis Video driver appendix:
- Added section titled “Supported firmware” to the introductory topic.
- Added a new topic titled “Setting up a secure connection to a legacy camera.”
- Added a sentence to the topic titled, “Disabling TLS between camera(s) and station.”
December 2, 2020
Updated the “Using the Video Surveillance Viewer” topic.
June 29, 2020
Added information about network ports when using fox streaming to deliver video content.
May 26, 2020
- Added topics and screen captures primarily related to security
- Added HTML5 streaming.
- In the topic, “About this guide”, added a caution note alerting users to restrict access to all computers, devices, field
buses, components, etc., that manage their building model.
- Added motion detection topic and other updates to the Axis appendix.
- Updated how to set up a Milestone XProtect corporate management server.
July 16, 2019
- Edited for
Niagara 4 and reorganized.
- Added Maxpro Video Driver documentation as Appendix C.
October 18, 2013
Original release