References the On Demand Poll Scheduler rates under the NiagaraNetwork’s History Policies container slot.

Configures how often this type of poll occurs.

Identifies each device and component by the type of entity (Object Id) combined with a unique Instance Number.

For devices (controllers, instruments, meters, etc.), Instance Number must be unique within the BACnet internetwork. For components (points, schedules, analog inputs, files, groups, multi state inputs, etc.), it must be unique within the device.

Identifies a BACnet object. This name should be unique within this specific device.

For components, this name includes the entire component path under the station’s Config using period (.) delimiters between parent.child levels. This enforces (externally) the BACnet requirement for unique names for all objects in a device.

For a proxy point, this is the default name in the station.

You can shorten or edit Object Name, however, each Object Name must be unique among all server descriptors under the Export Table.

Reports the type of object.

Configures four status flags for BACnet. These options are available to enable detection of specific status conditions.

Reports the status of the event.

Provides information when an error interrupts communication with a device.

No Fault Detected indicates that things are OK.

Unreliable Other indicates that the exported BACnet object appears in fault. This might happen, for example, if the source (exported) component is a proxy point under some other driver, and device communications are down or if the point has been disabled.

In this case, the BACnet export descriptor retains a status of ok.

Affects only the BACnet exposure and access to the source component. If the source (exported) component is a proxy point, the equivalent Enabled property in its ProxyExt is not affected.

true writes the point’s current value to the Present Value property. Often, a remote BACnet client sets (or clears) this Out of Service state.

You can set this property to false if needed.

Sets up an array of object identifiers that identify priority values.