Connections (bacnet-HubFunctionConnections)
This component configures the hub function connections. It supports the ScHubPort.
Figure 58. 
To access these properties, expand , and double-click Connections.
| Property | Value | Description |
|---|---|---|
| Enable Idle Cleanup | true (default) or false |
Turns connections cleanup on (true) and off (false).
|
| Idle Cleanup Interval | hours minutes seconds (defaults to 1hour) |
Configures when to clean up connections.
|
Actions
- Disconnect All disconnects all connected hub-accepting connections on the Hub Function and direct-initiating and -accepting connections on the Node Switch.
- Remove All Idle Accepted deletes all hub accepting connections on the hub function or direct accepting connections on the node switch that are disconnected (in the idle state).