Hub Function (bacnet-HubFunction)

This component configures the hub function.

Figure 57. Hub Function properties

To access these properties, drag or copy a Hub Function component from the bacnet palette (SecureConnect node) to BacnetNetwork > Bacnet Comm > Network > ScHubPort > Link folder.

To update these properties, expand Config > Drivers > BacnetNetwork > Bacnet Comm > Network > ScHubPort > Link and double-click Hub Function.

In addition to the standard property (Enabled), these properties support this component.

Property	Value	Description
Hub Max Bvlc Length	numeric value	Specifies the maximum Bvlc message size that the hub function can process in bytes.

Actions

Add Sc User adds a secure connect user to the UserService. If a user is already associated with BACnet/SC, you receive an error message. No message confirms the addition.
Remove Sc User removes a secure connect user from the UserService. No message confirms the deletion.
Configure Local Hub Connector configures the settings for the primary or the failover connections.