Bacnet Comm (bacnet-BacnetStack)
The Bacnet Comm properties configure the protocol stack for all BACnet communications. Bacnet Comm has a Comm Control property that you must enable for any BACnet communications.
Relative to other Bacnet Comm child containers, the properties under the Client, Server, and Transport containers require little configuration (from default values).
Possible exceptions apply to theServer component. These exceptions are not typical, and can be skipped whenever the station’s BACnet driver operates only in client mode, which means that it is not licensed and configured to operate as a BACnet server.
Figure 29. Bacnet Comm properties
You access these properties by clicking , and expanding Bacnet Comm; or by expanding the BackupNetwork in the Nav tree and double-clicking the Bacnet Comm container.
| Property | Value | Description |
|---|---|---|
| Comm Control | drop-down list | Configures communication control:
|
| Client | read-only | Represents the client side of the application layer of the Bacnet communications stack. It has no available properties. |
| Server | additional properties | Contains server-related properties. Refer to a separate topic in this document. |
| Transport | additional properties | Contains transport-related properties. Refer to the properties by name in this dictionary. |
| Network | additional properties |
Contains network-related properties. Refer to separate topics in this document.
|