Creating object requests with initial values

You can create five objects and configure them with initial values: Calendar, Event Enrollment, Notification Class, Schedule and Trend Log.

Prerequisites: You are working in Workbench connected to your Supervisor station that has been configured with a BacnetAWSNetwork.

Perform the following steps:

Expand Config > Drivers > BacnetAWSNetwork.
The Bacnet Aws Device Manager opens.
If you have not already done so, click the Discover button.
The driver runs a discovery job to locate all remote controllers and devices.
Expand a device and double-click its Config node in the Nav tree.
The Bacnet Aws Config Manager view displays.
To create a dynamic object, open the bacnet palette and drag a BACnet object from the Config folder in palette to the remote controller’s Config folder under the BacnetAWSNetwork.
NOTE: This Config folder is not the Supervisor station's Config folder. It is the controller station's Config folder, which is under the Supervisor station's BACnetAwsNetwork.
Right–click the object in the Database pane and click Views > AX Property Sheet.
The object’s Property Sheet opens.
Enter initial properties and click Save.
Right-click the object and click Actions > Create Object.

The driver creates each object, giving each a unique object identifier and automatically places the object in a dynamicObjects folder, under the BacnetAwsNetwork > Local Device > Export Table in the Supervisor station’s Nav tree.
NOTE: The Create Object action is not available under a BacnetNetwork. It requires the BacnetAwsNetwork.