Restore options

The restore options are displayed when restoring a controller (platform and station) that was backed up to a USB flash drive.

The restore options display when you connect to the controller using a USB-to-microUSB cable and run a terminal emulator.

This Platform’s ID is hostid
Please make your selection below
1) Abort Recovery/Restore mode
2) Show backups for other host IDs
3) backup file name

Where: backup file name is the name of the backup file on the USB flash drive:

(hostid (unique host ID of the controller), underscore (_) timestamp)

Menu item	Description
1) Abort Recovery/Restore mode	Allows you to abandon the process of recovering or restoring a USB backup.
2) Factory Recovery ALL DATA WILL BE LOST!!	Recovers the controller to its factory default state.
3) Show backups for other host IDs	Displays all backups on the UPS flash drive.
4–`n`) `hostid_timestamp`	Displays the USB backup file name, where: `n` is the option number. `hostid` is the host name. `timestamp` identifies the date and time when the backup was made.