Iot Hub Message Client (cloudIotHubDep-IotHubMessageClient)
This component communicates with the
Figure 33. Iot Hub Message Client properties
To access these properties, expand , right-click Message Client and click
| Name | Value | Description |
|---|---|---|
| Transport | AMQPSoverWebSocket (default), AMQPS | Sends messages to the IotHub. The AMQPSoverWebSocket (AMQPS/WS) option connects to
NOTE: You need to configure firewalls to allow outbound connections from NiagaraStations to the hosts specified in the prerequisites
for the procedure, “Setting up device internet access”, and for the port indicated by the selected Transport value (either
AMQPSoverWebSocket or AMQPS).
|
| Message Timeout | hours minutes seconds (defaults to five minutes) |
Specifies how long to wait for a response for a message sent to the cloud platform.
CAUTION: The Message Timeout value should remain at the default value. Adjust this value only upon recommendation by your Support channel.
|
| Compression | drop-down list |
Configures the driver to compress messages.
|
| High Priority Queue | additional properties |
The topic “High/Low Priority Queues” documents these properties.
|
| Low Priority Queue | additional properties |
The topic “High/Low Priority Queues” documents these properties.
|
| Sentience Message Rate Limit | 5 (default), 0 (no limit) | Configures the maximum number of messages/second from station to
This property configures the CloudConnector for the
|
Actions
- Reset Metrics — this resets all the metrics.