Requirements

The following section describes what you need to set up for using CloudWrite.

The Forge Connect Gateway has been installed and registered with the cloud.
In the Forge Connect Gateway, you have added the connector from the cloudSentienceConnector palette.
You have a cloud network, for example, a NiagaraCloudNetwork, which contains the CloudSentienceDevice.
Once you set up the CloudSentienceDevice, you need to point it at a cloud connector. More specifically, you have an ORD reference to the cloud connector through which the data are sent to the cloud.
NOTE: In case of a single cloud connector, the device automatically locates and selects it.
Prior to using CloudWrite, the Forge Connect device has discovered the remote station and its proxy points. The remote station has exported its points to the Forge Connect application using NCHSD (Niagara Cloud Honeywell Sentience Driver), which means that the points are now replicated in the station’s proxy points in the Forge Connect Gateway.