This procedure describes downloading and installing required software modules and restarting the station on a PC.
- In the web browser, log in to the
Niagara Community software portal (
https://www.niagara-community.com) and click Software (located upper right).
- In the Modules section, scroll down to the bundle titled "NCHSD for N4xUy", where 'x' is your
Niagara installation's minor version, and 'y' is the update version. For example, if your station is running
Niagara 4.10u6(
Niagara 4.10 Update 6), you should look for NCHSD for N410U6.
NOTE: The minor and update versions for your NCHSD module bundle must match the minor and update versions of your
Niagara installation, although the major version of the NCHSD module bundle will be a 202x number.
The zip file downloads to your system.
- In your Windows user downloads folder (
C:\Users\[UserName]\Downloads), right-click on the .zip file and extract the contents to your SysHome installation folder (Niagara/Niagara4 x.x).
NOTE: It is important that you install a
Niagara Cloud version that is compatible with the
Niagara core version. For more details, check the “Version compatibility” in the “From the cloud to station” chapter.
- If the system displays a prompt to Overwrite any existing previous versions?, click OK.
The nCloudDriver software modules and palettes are ready to use.
- Restart the station and
Workbench
Once the station restart is complete, you can proceed to install and configure the CloudConnector, NiagaraCloudNetwork, and CloudSentienceDevice.