aceEdge-NrioDevice
NrioDevice (an implementation of the ace-AceDynamicComp component) represents a specific device. Map Nrio16Device and Nrio34Device
components to the corresponding physical IO-R modules. Configure properties to address the device.
You can map the NrioDevice component to a specific IO-R module via the Match window.
This component is found in the ACE Catalog, AceNrio folder.
Figure 7. Nrio34Device properties (same for Nrio16Device)
In addition to common AceDynamicComp and health properties, the following configurable properties are present.
| Name | Value | Description |
|---|---|---|
| devAddress | ||
| enableCommLossDefaults | true, false (default) | |
| enableStartupDefaults | true, false (default) | |
| commLossTimeout | 8 (default) | |
| startupTimeout | 15 (default) | |
| devVersion |
Actions
Following are right-click menu options for Nrio16Device and Nrio34Device components
- Force Read —
- Wink — toggles the digital output (DO1) of the selected device. This action is enabled when the device status is “OK”.
- Ping — checks on whether the NrioDevice is in service. This action is enabled when the device is matched.
- Match — opens the Match window, triggering the match and discovering process for the NrioDeivce. This action is enabled when the device status is not “OK”.