This topic provides a record of document changes.
Updates (changes/additions) to the NRIO Driver Guide document are listed below.
- July 26, 2017
Updates and edits throughout entire document to provide flexibility for document branding.
- May 16, 2017
Content updated to include changes resulting from development of remote I/O hardware modules, (IO–R–16 and IO–R–34) in
Niagara 4.3 for use with
Niagara JACE-8000 embedded controllers.
- Many changes to topics in the Nrio Driver Installation chapter, added references to remote I/O modules for the JACE-8000, also rearranged topics and combined a few.
- In the topic, “About the NrioNework,” edited the 1st note to include the added support for remote I/O modules for the JACE-8000
- In the topic, “About the NrioModule,” added details about the support for new I/O hardware modules, and added details on driver
Default Output Value changes.
- In the Component Guides chapter, there is an added topic on the nrio-Nrio34Module component.
- Published: May 5, 2009
Initial document.