AdvisoryContainer properties
Property sheet access of an AdvisoryContainer shows its single Alarm Enable configuration property and a child AdvisoryAlarmSourceInfo
(Alarm Properties) container.
Figure 17. AdvisoryContainer (property sheet) showing expanded Alarm Properties
| Name | Value | Description |
|---|---|---|
| Alarm Enable | true (default), false | Enabled (by default), when true, each weather advisory results in an alarm, routed using the Alarm Properties below. Note this differs from alarm setup in
the “AdvisoriesAlarmExt”, where an “Urgency” property existed, configurable to a “lower” urgency level (“Future”, “Past”,
or “Unknown”).
If set to |
Alarm Properties
Contains typical Alarm Source Info child properties, two of which are described below. Remaining alarm properties operate as in similar alarm extensions for devices or points.
| Name | Value | Description |
|---|---|---|
| Alarm Class | Default Alarm Class (default) | Often, you create one or more alarm classes expressly for weather-related alarms, and specify one here. |
| Source Name | %parent.parent.parent.provider% |
Specifies the sourceName seen in an alarm record, where the default value results in the name of the parent WeatherReport (locale). |