Adding a CcnDevice using the New button

A CcnDevice resides under a CcnNetwork. This procedure uses the New button on the CCN Device Manager to add a device.

Prerequisites: You added a CcnNetwork to the remote station to which you are connected.

To access Ccn Device Manager expand Config > Drivers > CcnNetwork and double-click the CcnNetwork.
The Ccn Device Manager opens.
Click New.
The New window for creating a device opens.
Select Ccn Device and click OK.
A second New window opens.
Configure at least Bus No and Elem No and click OK.
The driver adds the device to the database.
Right-click the device and click Actions > Fetch.
The driver retrieves additional device information, such as pic type, part no, model no, etc.
The Status of a CcnDevice is either {ok} or, less typically, {fault}. The Health slot contains historical timestamp properties that record the last device transitions from {ok} to any other status. The Fault Cause property further explains any fault status.