Tab mounting dimensions
Tab mounting measurements shown below are in inches and millimeters (mm).
DIN mounting is recommended over tab mounting. Refer to “Mounting on a DIN rail” for details.
Figure 4. JACE-9000 controller tab mounting dimensions
| Callout | Description |
|---|---|
| 1 | JACE-9000 with no option modules added. Allow at least 1.5” (38mm) clearance around all sides. |
| 2 | Option expansion module. Up to four (4) may be used. Refer to “Option module and capacity considerations” for details. |
| 3 | Distances between the center of the tabs from one unit to another unit. |