The following lines represent a “snippet” of the DeviceTypes.xml file.

<deviceTypes> <device   controllerType="HX1"
       ct="0"   cm="255"  snc="8000" sna="SN"
rdChCmd="false">   <channel address="FF00"
desc="System Channel"                                      prefix="system"/> 
 <channel address="FF01" desc="System Subchannel" 
                                 prefix="system2"/>  
<channel address="FE00" desc="Main Analog Input Channel"
                          prefix="ai"/>   <channel
address="FE01" desc="Analog Input Subchannel 1"      
                    prefix="ai1"/>   <channel address="FE02"
desc="Analog Input Subchannel 2"                           prefix="ai2"/> 
 <channel address="FE03" desc="Analog Input Subchannel
3"                           prefix="ai3"/>   <channel
address="FE04" desc="Analog Input Subchannel 4"      
                    prefix="ai4"/>   <channel address="FE05"
desc="Analog Input Subchannel 5"                           prefix="ai5"/> 
 <channel address="FD00" desc="Main Analog Outputs
Channel"                         prefix="ao"/>   <channel
address="FD01" desc="Analog Output Subchannel 1"     
                    prefix="ao1"/>   <channel address="FD02"
desc="Analog Output Subchannel 2"                          prefix="ao2"/> 
 <channel address="FC00" desc="Binary Inputs Channel"
                              prefix="bi"/>   <channel
address="FB00" desc="Main Digital Outputs Channel"   
                    prefix="do"/>   <channel address="FB01"
desc="Digital Outputs Subchannel 1"                        prefix="do1"/> 
 <channel address="FB02" desc="Digital Outputs Subchannel
2"                        prefix="do2"/>   <channel
address="FB03" desc="Digital Outputs Subchannel 3"   
                    prefix="do3"/>   <channel address="FB04"
desc="Digital Outputs Subchannel 4"                        prefix="do4"/> 
 <channel address="FA00" desc="Setpoints Channel" 
                                 prefix="sp"/>   <channel
address="FA01" desc="Economizer Setpoints Subchannel"
                    prefix="econ"/>   <channel address="FA02"
desc="Cooling Reset Subchannel"                            prefix="coolReset"/> 
 <channel address="FA03" desc="Heating Reset Subchannel"
                           prefix="heatReset"/>   <channel
address="FA04" desc="Calculated Setpoints Subchannel"
                    prefix="calcSp"/>   <channel address="FA05"
desc="VVT Setpoints Subchannel"                            prefix="vvtSp"/> 
 <channel address="F900" desc="Main Schedule Channel"
                              prefix="mainSched"/>   <channel
address="F901" desc="Schedule 1 Subchannel"          
                    prefix="sched1"/>   <channel address="F902"
desc="Schedule 2 Subchannel"                               prefix="sched2"/> 
 <channel address="F903" desc="Schedule 3 Subchannel"
                              prefix="sched3"/>   <channel
address="F904" desc="Optimized start Subchannel"     
                    prefix="optStart"/>   <channel
address="8000" desc="Factory"                        
                    prefix="factory"/>   <channel address="5F00"
desc="Packaged Heat Pump Subchannel 1"                     prefix="htPmp1"/> 
 <channel address="5F01" desc="Packaged Heat Pump Subchannel
2"                     prefix="htPmp2"/> </device><device
  controllerType="SBC-GPC1"   ct="105"   cm="255"
  snc="FF00" sna="SN" rdChCmd="true"/></deviceTypes>