By default, the following columns appear in the Discovered table of the PupDeviceManager view:
Name
Name of the device-level component that represents the PUP device.
Enabled
Indicates whether the device component is enabled (true) or disabled (false).
Unit Number
Reflects the address of PUP device (the “ID” attribute of channel FF00).
Manufacturer
Reflects the “CM” attribute of channel FF00 in the PUP device.
Controller Type
Reflects the “CT” attribute of channel FF00 in the PUP device.
Controller Description
The common name looked up the “Devices Types File” file, using “Manufacturer” and “Controller Type” as look up parameters.
Peer Type
Reflects the peer type as read from the device’s “TP” attribute of the system channel. If the “TP” attribute does not exist, the Peer Type is assumed to be “slave.”
Version
The “version 8” bit from the Acknowledge response to the “Say Hello” command.
Exts
(Build 3.0.104, 3.1.28, 3.2.2 and higher only) Provides shortcut access to default manager views for the component’s device extensions—in this case, “Points” (PupPointManager).
Status
Reflects the status of the device, typically “ok” unless “disabled” or “down.”
In addition, using the table options control, the following additional data columns are available:
Path
Station path of the device-level component, relative to the root.
Type
Device-level component type, currently only PupDevice.