Copying a station from a container version
This section describes how to copy a station from a previous container version.
Perform the following steps:
- Before upgrading the container, open the station copier from the platform and copy the station to your local files to store
it on your
- Select the
Copy every file in the station directory and its subdirectoriesoption and click Finish.
- Start a new container image and make a platform connection. Repeat the licensing steps above if necessary.
- Expand the platform container in the Nav tree, double-click the System Copier, select the station that you want to copy to the container and click Copy.
- Click Next, select the
Copy every file in the station directory and its subdirectoriesoption, and click Next again. - Select
Start After Install: Start the station immediately after it is copiedandAuto-Start: Start the station every time the platform daemon startsoptions, click Next, and click Finish to complete.You can check the status of the transfer in the Transferring station window.
- Check the station status in the platform’s Application Director.