niagaraDriver-ReachableStationInfo
This component appears automatically for any discovered, reachable station. It provides route information and allows you to
enable or disable a particular route to a reachable station.
The ReachableStationInfo components get automatically placed under .
Figure 10. Reachable Station Info properties
| Property | Value | Description |
|---|---|---|
| Station Name | read-only | Displays the name of a remote, reachable station. |
| Station Version | read-only | Specifies the baja version of the destination reachable station. |
| Route To Station | read-only | The route of intermediate station names (delimited by semi-colons) to reach the remote, reachable station. |
| Min Version Along Route | read-only | Specifies the minimum baja version along the route of mid-tier stations to reach the destination reachable station. |
| Virtual Space Ord | read-only | Displays the ORD to the virtual space of the remote, reachable station. If virtuals are not enabled somewhere along the route, this ORD will be NULL. |
| Time To Reach | read-only | Displays the last amount of time it took to reach the remote, reachable NiagaraStation over the route during the last update. |
| Route Enabled | true (default), false |
If set to true, this particular route to the reachable station is enabled and may be used, for example, for system indexing. If set to false, this route is disabled and will be excluded from the set of possible routes to a reachable station during activities such
as system indexing.
|